Cork
Laser cut cork is very popular at the moment
Laser cut cork is possibly one of the most versatile products around – we’ve cut components for everything ranging from a stencil to intricate decorative panels.
Together with other engineered woods laser cut ply is once again a well-used material. The range of veneered finishes available means it can be used for everything from signs to theatre sets. We cut decorative garden panels, High Volume Christmas decorations and roofing components;
Don’t forget we can also laser engrave both materials with photographic quality images
| Max. Part Size | 3000x2000mm (but usually limited by sheet size of 2440x1220mm) |
| Min. Part Size | Very Small – depends on material thickness |
| Max. Thickness | 18mm |
| Min. Thickness | <0.8mm |
| Min. Detail | Detail should not usually be less than 30% of the material thickness e.g. minimum 3mm diameter hole in 9mm thick material |
| Cutting Tolerance |
|
| Effects of Thermal Cutting | Because these are organic materials the cut edge chars and is covered with carbon – the thicker the material the more pronounced the effect. |
| Grades Stocked | Most grades and finishes are available – waterproof, fire resistant, veneered etc. are usually available in most thicknesses. |
| Sheet Sizes | 2440x1220mm; Occasionally 3000x1500mm |
| Common Applications | Decorative Panels, Exhibition / Theatre Sets, Stencils, Restoration, Engineered Components and just about everything else! |
