Brass
Our Fiber Lasers are the latest technology that can easily Laser Cut Brass.
We have Fiber Lasers that are specialise in Laser Cutting Brass.
| Max. Part Size | 3000x1500mm (but usually limited by sheet size of 2000x1000mm) |
| Min. Part Size | Very Small – depends on material thickness |
| Max. Thickness | 8mm |
| Min. Thickness | <0.5mm |
| Min. Detail | Detail should not be less than the material thickness e.g. minimum 3mm diameter hole in 3mm thick material |
| Cutting Tolerance |
|
| Effects of Thermal Cutting | The cut edge on thinner sections is smooth – the edge quality degrades as thickness increases. Discolouration of the material can occur. |
| Common Grades | CZ108 – There are lots of others – tell us what you need and we’ll try to find it. |
| Sheet Sizes | 2000x1000mm, possibly less |
| Common Applications | Decorative products / special engineering components / electrical / others |
